DFI LanParty UT NF4 Ultra-D Motherboard

Location: Yorkshire and the Humber - Barnsley
Swap Value: £25-£50

Description:

This is a proper old school overclocking motherboard. Takes socket 939 CPU's.
It's in fantastic condition, and still works as i recently had a play at overclocking my old Opteron CPU on it.
Comes with at least 512MB PC3200U RAM, but i think i have more i can put with it.
On the picture the northbridge fan is missing from the heatsink, i do have it and will attach it before postage.

Info:

DFI Lanparty UT NF4 Ultra-D nForce4 Ultra-D PCIe Skt939 2000FSB SATA RAID Gigabit LAN Firewire 8ch.audio ATX Motherboard socket 939

LANPARTY UT Ultra-D exclusive features
DXG(Dual Xpress Graphics) supported
Karajan Audio(Theater like7.1 /8ch supported)
Dual Gigabit LAN
nVIDIA nVRAID
nVIDIA nTune(embedded overclocking solution)
nVIDIA ActiveArmor
(Embedded hardware firewall & network solution)
nF4 chipset supported Serial ATA(3Gb/s)
100% Japanese Capacitors
UV sensitive slots
EZ-on / EZ-touch onboard switch button
CMOS reloaded®
All New Genie BIOS

Specification
CPU
AMD® Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron
Socket 939


Front Side Bus
2000MT/s HyperTransport interface


Chipset
NVIDIA nForce4 Ultra


Memory
Four 184-pin DDR SDRAM DIMM sockets
Supports dual channel (128-bit wide) memory interface
Supports up to 4GB system memory
Supports DDR266, DDR333 and DDR400 DDR SDRAM DIMM


Expansion Slots
2 PCI Express x16 slots
1 PCI Express x1 slot
1 PCI Express x4 slot
2 PCI slots


BIOS
Award BIOS
CMOS Reloaded
CPU/DRAM overclocking
CPU/DRAM/Chipset overvoltage
4Mbit flash memory


Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- RTC timer to power-on the system
AC power failure recovery


Hardware Monitor
Monitors CPU/system/chipset temperature
Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vchipset/Vdram voltages
Monitors the speed of the CPU fan, Fan 2 and chipset fan
CPU Overheat Protection function monitors CPU temperature during system boot-up


Audio
Karajan audio module
- Realtek ALC850 8-channel audio CODEC
- 6 audio jacks
- 1 CD-in connector
- 1 front audio connector
S/PDIF-in/out interface


LAN
Dual Gigabit LAN - Vitesse VSC8201 Gigabit Phy and Marvell 88E8001 Gigabit PCI
Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and
802.3ab (1000BASE-T) standards


IDE
Two IDE connectors that allows connecting up to four UltraDMA 133Mbps hard drives
NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA
RAID 0, RAID 1 and RAID 0+1


Serial ATA with RAID
Four Serial ATA ports
SATA speed up to 3Gb/s
RAID 0, RAID 1 and RAID 0+1
NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA


IEEE 1394
VIA VT6307
Supports two 100/200/400 Mb/sec ports


Rear Panel I/O Ports
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
Karajan audio module (6 audio jacks)
1 IEEE 1394 port
2 RJ45 LAN ports
6 USB 2.0/1.1 ports


I/O Connectors
2 connectors for 4 additional external USB 2.0/1.1 ports
1 connector for 1 external IEEE 1394 port
1 connector for 1 external serial port
1 front audio connector for external line-out and mic-in jacks (on the Karajan audio module)
1 CD-in internal audio connector (on the Karajan audio module)
1 S/PDIF connector for optical cable connection
1 IR connector
4 Serial ATA connectors
2 IDE connectors
1 floppy connector
1 24-pin ATX power connector
1 4-pin ATX 12V power connector
2 4-pin 5V/12V power connectors (FDD-type and HDD type)
1 front panel connector
5 fan connectors
4 diagnostic LEDs
EZ touch switches (power switch and reset switch)


PCB
ATX form factor
24cm (9.45") x 30.5cm (12")

I want to swap for

Other components, but will consider anything

I am open to ALL SWAPZ

My favorite categories