F1 liquid yellow Vxr

Description:

F1 liquid yellow
astra h vxr
registered 20 December 2007

Modifications:
front mount intercooler.
2.5 enchancement tophat and boost pipe.
3" exhaust double decat with sports cat and back box, 4" round tip.
stage 3 map running 300+ bhp but need to go back on rolling road as more mods since last remap!
boost peaks up to 28psi settles to about 21 22psi pulls like a train all i can say is hold.onto that steering wheel kedd!
NGK - BKR7EIX spark plugs.
cross over delete, colour coded with ramair filter.
imperial performance a/c delete belt and tensioner, condenser is off, pump is also off, blanking plate will be fitted when delivered.
uprated waterpump and timing belt done 1000 miles ago.
gearbox big bearing upgrade with fast road setup last September.
bcs deleted with boost gauge plumbed into driver side air vent.
car currently sits on white light weight 15kg racing alloys 225 40 18s toyo proxy try tires on all 4 corners.
will come with a spare set of gm penta 18inch
rs bonnet vents.
bilstein by and 30mm eibach lowering springs brand new fitting the sometime weekend 3/7/20.
wishbones droplinks replaced, pagid discs and brembo pads.
just got the head back with all new components and skim 1/7/20. all new parts going in when being rebuilt :
Head gasket, rocker cover gasket with o-rings, inlet manifold gasket, exhaust manifold gasket, head end gasket,thermostat housing rubbers, upper dump gasket, lower sump gasket, oil pump gasket, oil filter housing gasket, oil drain gasket, oil sensor seal, crankshaft oil seal, crankshaft oil pump seal, timing belt kit, 16 valve guides, 16 piper valve springs, head sent off for head to be skimmed and valves reseated, new header tank, new k04 compressor housing, new rocker cover, receipts to prove.

Iv started the rebuild and after taking the sump off I realised I had standard conrods, as its running good power I ordered and replaced then with pec h beam forged conrods with arp 2000 bolts, acl big end racing bearings, and Hastings piston rings.
Making this a semi forged engine the only thing left is the pistons but the standard pistons are semi forged and for 400+ bhp. final bits to do before start up the weekend, exciting times!

comes with all spare parts, components, working spare sensors, composite rear diffuser splitter with fins
loads of photos from past work, of the car, being washed loads!
windows tinted all round.
the body work is in good condition apart from the new front bumper not being painted and rear bumper has been cracked but I do have replacement just needs paint
the front bumper will be colour coded asap but will be looking at full car respray in near future. same colour!!
she pops bangs spits flames, i fecking love this toy!! but need something a little more economical, who ever ends up with this beauty will not be disappointed!!