Mk4 golf 1.8t forged engine

Location: South East England - Sevenoaks
Swap Value: £3.000+
Model: Volkswagen Golf     Year: 1999     Mileage: 169,400 miles
Private Individual

Description:

This is a long read but well worth it for a a car that's had alot of money spent

Mot Jan 2024

This golf started out as a drive by cable narrow band having the Agu engine and me3.8 managment. This was all converted to Wide band me7.5 managment and running a k04 turbo. Remapped running 284bhp estimated. This car keeps up with golf r's and pisses all over s3's

Ive spent alot of money as you will see from the list below. Currently there is a few things left to do. But I'm looking to have those sorted before a saw. As follows. Replace wings for ones that don't have any marks or rust. The one currently are OK but just starting to. Bubble in the usual place down by the sill (the sill isn't rusted or starting to in any way) need a bonnet because the very corner had a bend. Looks. Like the boonet way taken off and dropped by who ever owned it before me

Inside. Need black sunVisors grab handles and map light to match the re trimmed headlining and door pillers.

I also have all the kit to Convert to 6 speed with smf flywheel and uprated clutch
which I will be doing as my brother needs my 5 speed box because his shit it's self.

The engine has been fully rebuild and currently has 350 miles on it fully run in


Kolbenschmidt KS piston rings
Msr Forged rods
ACL main bearings
ACL rod bearings
Pinned crank
Arp crank bolt
Uprated 12.8 main bearing cap bolts
Super tech inconnel exhaust valves
Supertech nitride intake valves
Supertech  guides
Supertech valve stem seals
New and Recut valve seats
0.005" skimmed head
New vvt tensioner and chain
All new elring gaskets
Elring rear main seal
k04 023 turbo
Braided oil and water lines
Stainless steel exhaust studs and nuts
Stainless steel cam alen head bolts.
Stainless steel intake Alan head bolts
6.5kg lightened abf/g60 flywheel
Saches vr6 clutch
Relentless v4 style manifold, welds to strengthen
225 injectors
3" maf
Kesmo 4 bar pump
3" intake pipe
Port matched small port manifold to large port head
600x300 cm front mount intercooler
2.5" intercooler pipes
3" decat down pipe
3" system
Simons rear box with stelth down turn
Cheap coilovers (need changing at some point)
New lower arms
Braided brake lines
New master cylinder
New discs and pads all round

Maf readings estimate 284bhp.
Easily spins 3rd in the wet.

Looking 3k+ swaps
After something else turbod with same power
Or higher bhp n/a hatch/saloon

If no Swap I'll put up for sale as have my eye on a a3 8p 3.2 quattro

I want to swap for

Same power or more turbod or higher bhp saloon/hatch

Looking at audi a3 3.2 quattros

I am open to ALL SWAPZ

My favorite categories